Advertisement
The Tilt Back Feature:
There are instances when you may need to tilt the amplifier back to better
project its sound towards your ears (as a near-field monitor) or towards your
audience (for better coverage). The CA15 features a tilt back device underneath
its cabinet for this purpose. To utilize this tilt back feature, refer to the illustration
below and follow these simple steps:
1 Carefully lean the cabinet back - until the front of the cabinet is several
inches off the floor.
2 Pull the tilt back bar down (to unlock it from its holder) and swing it for-
ward until it locks into place.
3 Lower the front of the amplifier until it rests on the tilt back bar.
(To return the bar to its traveling position, reverse these steps)
1
6
CA15 Acoustic Amplifier
2
3
CAUTIONS:
Avoid trapping your hand
under the tilt back bar.
Always make sure the
bar is securely locked in
place before lowering the
amplifier.
Do not sit on or rest your
foot on the amplifier
when it is in the tilt back
position.
Advertisement
