Advertisement
Quick Links
Advertisement
Related Manuals for Crate CA112
Summary of Contents for Crate CA112
- Page 2 The CA112 was designed, evaluated, and tweaked by musicians and music loving engi- neers. Highly sophisticated computer driven assembly machines and highly skilled assem- blers use only the finest components to pro- duce each amp.
-
Page 3: Technical Specifications
Crate Acoustic amplifiers are Made With Pride in the U.S.A. To get this amplifier to sound its best, read this owner’s guide prior to its use. To keep this amplifier looking its best, avoid abrasive cleansers. Wipe the cab- inet clean using a slightly dampened cloth. -
Page 4: On The Front Panel
24: Graphic EQ. Use these sliders to control the output frequencies indi- cated below each control. The center position of each control is flat (no boost or cut). Use the graphic EQ to adjust the output of the CA112 to best suit your tastes and to compensate for room acoustics. -
Page 5: On The Rear Panel
(This control works independently from the amplifier’s master Effects Foot Loop Switch level control.) 34: Tweeter Level. Use this control to adust the signal output level from the CA112’s internal tweeter. Rotating this control counter-clockwise Return Send Reverb/ Chorus reduces the tweeter’s output level. Not Shown: Power cord. - Page 6 www.crateamps.com ©1999 SLM Electronics A Division of St. Louis Music Co. 1400 Ferguson Avenue St. Louis, MO 63133 P/N 47-840-01 10/99...