ZyXEL Communications SBG3300-N series User Manual page 46

Chapter 5 Broadband
Table 6 Network Setting > Broadband (continued)
LABEL
802.1p
802.1q
IGMP Proxy
NAT
Default
Gateway
IPv6
MLD Proxy
Modify
46
DESCRIPTION
This indicates the IEEE 802.1p priority level assigned to traffic sent through this connection.
This displays N/A when there is no priority level assigned.
This indicates the VLAN ID number assigned to traffic sent through this connection. This
displays N/A when there is no VLAN ID number assigned.
This shows whether the Device act as an IGMP proxy on this connection.
This shows whether NAT is activated or not for this connection.
This shows whether the Device use the WAN interface of this connection as the system
default gateway.
This shows whether IPv6 is activated or not for this connection. IPv6 is not available when
the connection uses the bridging service.
This shows whether Multicast Listener Discovery (MLD) is activated or not for this
connection. MLD is not available when the connection uses the bridging service.
Click the Edit icon to configure the WAN connection.
Click the Delete icon to remove the WAN connection.
SBG3300-N Series User's Guide