Table of Contents
Advertisement
6
Operating the appliance
Operating the appliance
Use the induction cooking zones with suitable cookware.
Switching the appliance on and off
Switch on
Switch off
After switching on, within approx. 10 seconds a heat setting or a function must be set,
otherwise the appliance automatically switches itself off.
Setting the heat setting
To set the heat setting
Switch off
Locking/unlocking the control panel
The control panel, with the exception of the "On/Off" sensor field, can be locked at any time
in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.
To switch on
To switch off
When you switch the appliance off, the locking function is automatically switched off.
Turning the STOP+GO function on and off
The STOP+GO function simultaneously toggles all active cooking zones to keep-warm mode
then back to the heat setting they were at before
To switch on
To switch off
STOP+GO does not stop timer functions.
STOP+GO controls the entire control panel apart from the sensor field
Control panel
Touch
for 1 second
Touch
for 1 second
Touch the desired heat setting,
if necessary, correct to the left
or to the right
Touch 0
Control panel
Touch
previously set heat setting
Touch
Control panel
Touch
Previous heat setting (not automatic warm-up or power
Touch
function)
Display
/
/ none
Control Panel
(for 4 seconds)
Pilot light
lights up.
goes out.
Display
to
/
Display
Display
.
Advertisement
Table of Contents
