Power Management Setup - Abit AMD ATHLON KV8 PRO User Manual

BIOS Setup

3-6. Power Management Setup

ACPI Suspend Type:
This item selects the type of Suspend mode.
[S1(PowerOn-Suspend)]: Enables the Power On Suspend function.
[S3(Suspend-To-RAM)]: Enables the Suspend to RAM function.
Run VGABIOS if S3 Resume:
Three options are available: Auto
when S3 resume active, the VGA BIOS need to be initiative or not.
Resume by OnChip USB:
Two options are available: Disabled or Enabled. The default setting is Disabled. When set to Enabled,
any event affecting from onchip USB will awaken a system that has powered down. This item can be
configured only if the item "ACPI Suspend Type" is set to [S3(STR)].
Power Button Function:
This item selects the method of powering off your system:
[Delay 4 Sec.]: Pushing the power button for more than 4 seconds will power off the system. This will
prevent the system from powering off in case you accidentally hit or pushed the power button.
[Instant-Off]: Pressing and then releasing the power button at once will immediately power off the
system.
CPU THRM-Throttling:
This item controls the CPU speed by cutting down its regular power to a percentage during the STR
(Suspend To RAM) state.
Restore On AC Power Loss:
This item selects the system action after an AC power failure.
Yes No. The default setting is Auto. This item can let you choose
3-21
User's Manual