Important Notices; Safety - Fujitsu RC25 User Manual

4. Important Notices

Chapter 5 and 6 contain cautions that must be taken when you operate the Rack Console,
and information related to safety. Carefully read these chapters to use the Rack Console
correctly.

5. Safety

CAUTION
 Condensation may occur on this device. Before using the Rack Console, allow it to dry out
completely and to reach the ambient temperature of the installation location.
 Make sure that the voltage supplied by the outlet to which the device is connected is within
the acceptable range of the device. Also, make sure that the rated voltage meets the
specification of the device. (Refer to "15. Technical Specifications" and the model plate on
the device.)
The Rack Console's power cable is specially certified. Use it only for the power outlet of

the Rack Console. Otherwise, electric shocks or short circuits may occur.
 Arrange the immediate area around the Rack Console's power socket and the rack's
power outlet so that the plug can be quickly pulled.
 Lay all the cables so that they are not damaged. Refer to the relevant sections in "8
Installation" when you connect or remove cables.
 Do not connect or remove the data cables during thunderstorms.
 Be careful not to get any objects, such as necklaces or paperclips caught (or any liquids
spilt) inside the device.
 In an emergency (e.g., damage to the housing, parts or cables; or if an object or liquid has
fallen into the device), remove all the power cables as soon as possible and contact the
store where you purchased the device or a Fujitsu maintenance representative.
 Only licensed engineers may repair the device. If any unlicensed user opens the device
and makes incorrect repairs, electric shocks or fire may occur.
 Note that when the device is open, the corners may cause injury if bumped into. Always be
careful when the device is open.
 We recommend that you store this device in the rack when it is not in use, or when you
operate other devices such as a server or other peripheral equipment.
 Using the keyboard when you are in poor health, or using the keyboard for extended
periods of time should be avoided.
 Always hold the connector portion and do not jerk cables when you remove them.
 Avoid operating the device with wet hands.
 Do not insert or remove connectors when your hands are wet.
 Do not place unnecessary items, such as a cup, on the device.
 Do not modify or repair the device.
 Only licensed personnel can dismantle, remove, or replace parts, such as the power
supply unit, which bear a warning mark (such as a lightning bolt mark).
 You can specify only the resolutions and refresh rates specified in the monitor explanation
in "11-3. Adjusting the Monitor". Contact the store where you purchased the device or a
Fujitsu maintenance representative if you have any questions.
 The data cables that are used for peripheral equipment must be adequately insulated in
order to prevent interference.
 To cut the power supplied to this device through the power outlet, unplug the power plug of
this device from the power outlet.
Safety Precautions
3