Configuring The Centronics Interface Timing; Printing A Test Label - Intermec Ethernet Adapter User Manual

8. Fill out the dialog box:
9. Click OK.
Since the LPR spooler must be running in order to print, put the spooler in the
"Startup" group.
Note: WLPRS41.EXE is a shareware program. Please register if you are using it for
more than a test period.

Configuring the Centronics Interface Timing

Before you can print to an Intermec printer, you must set the Centronics interface
timing to standard.
To set the Centronics interface timing
1. Download the IP address. For help, see "Downloading the IP Address" earlier in
2. Open the Ethernet adapter's home page. For help, see "Using a Web Browser to
3. From the home page, click the Configuration button.
4. From the Configuration screen, click Output.
5. Click the down arrow by Centronics Interface Timing LPT1 and select STNDRD.
6. Click the Submit Output Settings button.
7. Close your Web browser.

Printing a Test Label

You can use the test label provided on the disks or CD-ROM that came with your
Ethernet adapter to make sure you can print a file sent from your host or PC. This
section explains how to print the test label using an LPR spooler or a file transfer
protocol (FTP) session from a Windows 95, 98, and NT environment.
Local Spool File
Remote Queue Name
Remote Host Name
where:
name is the name of the printer.
prX is the logical printer.
xxx.xxx.x.xxx is the IP address for the Ethernet adapter.
this chapter.
Manage and Configure the Ethernet Adapter" in Chapter 8.
code39 code39
Connecting the Ethernet Adapter
name
:
: prX
: xxx.xxx.x.xxx
2
2-13