Configuring Bluetooth Serial Communications; Connecting And Pairing Your Sf51 And Host Pc; Connecting From Your Sf51 - Intermec USB Bluetooth Adapter Instructions Manual

5
Install the Windows Driver software on your PC, and follow
the onscreen instructions.
When the Bluetooth device not found message appears,
insert the Bluetooth adapter into a USB port on your PC and
click OK. When the installation is complete, a message box
appears telling you to restart your system.
6 Click Yes to reboot your PC.

Configuring Bluetooth Serial Communications

1 On your PC desktop, double-click the Bluetooth icon on the
taskbar. The Initial Bluetooth Configuration Wizard appears.
2
Follow the onscreen instructions to configure Bluetooth
communications.
3
At the Bluetooth Service Selection screen, make sure that the
Bluetooth Serial Port is the only check box selected.

Connecting and Pairing Your SF51 and Host PC

Pairing saves connection information between the SF51 and
your host PC. Your SF51 and host PC are automatically paired
the first time you create a Bluetooth connection.
There are two ways to create a Bluetooth connection:
• Connect from your SF51. Using this method, you can only
connect one SF51 to your host PC. When you place the SF51
in a charger, the SF51 is reset and the Bluetooth connection is
lost. After the SF51 is reset, it reconnects to your host PC.
• Connect from your host PC. Using this method, you can
connect more than one SF51 to your host PC.

Connecting From Your SF51

1
Press the Scan button on your SF51. The scanner enters a
discoverable state.
2
Start EasySet. Make sure that SF51 is selected as your
product.
3 From the EasySet commands window, select Data
transmission settings > Bluetooth parameters >
connect/disconnect.
10 USB Bluetooth Adapter Instructions