Activating/Deactivating The Inflow Of Rinse Aid - AEG FAVORIT 84470 VI User Information

1. Open the door of the dishwasher.
2. Press the release button on the
rinse aid compartment.
3. Open the cover.
4. Set the dosage level.
5. Press the lid shut until it clicks
into place.
6. If rinse aid has leaked out, wipe it
away with a cloth.

Activating/deactivating the inflow of rinse aid

With rinse aid the rinsing water drains away better and so you get
smear-free, gleaming dishes and clear glasses.
1. Press the ON/OFF button.
The LED indicators for all the buttons in the control panel that are
now able to be selected will become illuminated.
If the only LED indicator illuminated is one that belongs to a pro-
gramme button, this means that this dishwashing cycle has been
activated. The dishwashing cycle must be deselected (RESET):
Press function buttons 2 and 3 simultaneously for approx. 2 seconds.
The LED indicators for all the buttons in the control panel that are
now able to be selected will become illuminated.
2. Press function buttons 2 and 3 simultaneously and keep them
pressed. The LED indicators for function buttons 1 to 3 will flash.
3. Press function button 2 again.
The LED indicator for function button 2 will flash.
The multi-display will indicate the current setting:
4. Pressing function button 2 activates and deactivates the rinse aid
dispensing function.
5. Once the multi-display is indicating the required setting, press the
ON/OFF button.
The setting is now saved.
Inflow of rinse aid is deactivated
Inflow of rinse aid is activated (factory setting)
Operating instructions
BR09
11