Table of Contents
Advertisement
14. Insert loading door and hinges into recesses on the front of the ma-
chine and screw down.
15. Once the door stop has been replaced, check the function of the DOOR
button.
Note regarding contact protection: The machine is only secure for
operations again once all plastic parts have been inserted.
Special accessories
The following special accessories are available from your Service Force
Centre or your specialist dealer:
Intermediate installation kits for stacked washer and
dryer
These intermediate installation kits can be used to arrange the dryer
and an AEG-Electrolux washing machine (60cm wide, front loading) as
a space-saving washer/dryer stack. The automatic washing machine is
at the bottom and the dryer is at the top.
Two versions can be supplied:
– without stacker plate
– with extractable stacker plate
Installation kit for external condensed water drain
Installation kit (125 122 510) for direct draining of condensed water
into a basin, spigot, drain, etc. The condensate tank then no longer has
to be emptied; it must however remain in its position in the appliance.
To switch off the TANK indicator, see the section "Setup, Condensate
tank indicator"
Max. pumping height: 1m from the surface on which the dryer is
standing; max. pumping length: 3m
916 019 102
916 019 103
35
Hide quick links:
Advertisement
Table of Contents
