AEG Electrolux LAVATHERM T57830 User Information page 20

125985010 gb.qxp 2006-06-12
Drying results
unsatisfactory.
Loading door does not
open with DOOR button.
Loading door does not
close.
When pressing a button,
the corresponding
button flashes several
times.
Drum light does not
work.
PROGRAMME TIME display
changes erratically or stays
unchanged for a long
time.
Programme inactive,
EMPTY WATER display
illuminated.
20
13:16 Page 20
Problem Possible cause
Wrong programme selected.
Lint filter clogged.
Heat exchanger clogged
with lint.
Overloading of laundry.
Ventilation slots in base
area covered up.
Residue on inside surface of
drum or drum ribs.
Mains plug disconnected.
Programme selector in OFF
position.
Fine strainer not in place
and/or large mesh filter not
locked in place.
Washing protection. After
the start of the programme,
the option can no longer be
set.
Programme selector in OFF
position.
Defective light bulb.
Programme time is corrected
automatically depending on
type and volume of laundry
and level of dampness.
Condensate tank is full.
Remedy
Select a different program-
me the next time you dry
(see "Overview of program-
mes" section).
Clean lint filter.
Clean heat exchanger.
Observe recommended loa-
ding volumes.
Uncover ventilation slots in
base area.
Clean inside surface of
drum and drum ribs.
Make an adjustment using
the INTENSITY function (see
chapter "Drying, Selecting
additional functions").
Plug in at mains socket.
Set programme. Loading
door can be opened at any
time by exerting pressure on
the door.
Install fine strainer and/or
snap large mesh filter into
place.
Turn the programme knob
to OFF Set the programme
again.
Turn programme selector to
LIGHT or to any programme.
Replace light bulb (see next
section).
Automatic process; this is
not a machine fault.
Empty condensate tank,
then start programme with
START/PAUSE button.