Advanced - Buffalo AirStation HighPower WBMR-HP-GNV2 User Manual

Chapter 4 Configuration

Advanced

Configure advanced wireless settings.
Parameter
BSS Basic Rate Set
Multicast Rate
Reverse Direction Grant
DTIM Period
Privacy Separator
Output Power
WBMR-HP-GNV2 User Manual
Meaning
Set the communication speeds of administrative and
communication control frames of the AirStation and wireless
devices.
Set the communication speed of multi-cast packets.
For faster wireless communication, you may enable receiving
packets while sending packets.
Set the beacon responding interval (1 -255) for which the AirStation
responds to a wireless device. This setting is effective only when
power management is enabled for the wireless device.
If enabled, the Privacy Separator blocks communication between
wireless devices connected to the AirStation. Wireless devices will
be able to connect to the Internet but not with each other. Devices
that are connected to the AirStation with wired connections will
still be able to connect to wireless devices normally.
You may reduce the wireless radio power output. The power of a
radio wave and the distance that that radio wave reaches are almost
proportional, so if the output power is reduced, the distance that the
signal reaches also becomes smaller.
39