Advanced - Buffalo WZR-D1800H User Manual

Chapter 3 Configuration

Advanced

Configure advanced wireless settings.
Parameter
BSS Basic Rate Set
Multicast Rate
802.11n Protection
DTIM Period
Privacy Separator
Output Power
Meaning
BSS (Basic Service Set) configures the transmission rate of control
communication frames for a wireless client. Setup choices may vary
with different wireless clients.
Set the communication speed of multi-cast packets.
Enable to use 802.11n protection. 802.11n protection gives priority
to 802.11n devices in mixed mode (11b/g or 11a) networks.
Set the beacon responding interval (1 -255) for which the AirStation
responds to a wireless device. This setting is effective only when
power management is enabled for the wireless device.
If enabled, the Privacy Separator blocks communication between
wireless devices connected to the AirStation. Wireless devices will
be able to connect to the Internet but not with each other. Devices
that are connected to the AirStation with wired connections will
still be able to connect to wireless devices normally.
This sets the output of the wireless signal. Because the wireless
transmission output and signal distance range are nearly
proportional, when the wireless transmission output is reduced,
the signal distance range also becomes shorter.
- 41 -