Connecting To Your Telephone; Maintenance - Jabra STRATUS ULTRA-G User Manual

Connecting to Your Telephone

An amplifier is often needed to connect the headset to the telephone or
telephone system. For these applications, the headset is equipped with a Quick
Disconnect plug which mates to a Quick Disconnect jack on the amplifier.
Follow the instructions supplied with the amplifier to connect the headset and
amplifier to your telephone or telephone system (see Figure 14).
Some telephones do not require amplification. For these applications the
headset is equipped with a cable with a modular plug on the end. The
modular connector plugs directly into a headset port (modular jack) on the
telephone or console. The modular plug cable also has a mated Quick
Disconnect assembly (see Figure 15).
Disconnecting at the Quick Disconnect allows you to move around without
having to remove your headset. If you are on a call, disconnecting at the Quick
Disconnect effectively puts the other party on hold until you return.

Maintenance

The foam covers on the receiver and microphone can be washed in mild soap
and water. Replacement covers are available from your GN Netcom distributor.
Figure 14
Amplified Configuration
Figure 15
Unamplified Configuration
7