Table of Contents
Advertisement
When a button is
pressed, led above
START PAUSE START
PAUZE button is light-
ing in yellow
temporarily.
Programme inactive,
empty water tank
warning led is lighting.
Drying cycle ends
shortly after pro-
gramme starts.
Drying cycle lasts an
unusually long time.
Note: After around 5
hours the drying cycle
ends automatically
(see „Drying cycle
complete ").
Washing protection. After the start
of the programme, the option can
no longer be set.
Condensate tank is full.
Not enough washing loaded or
washing loaded is too dry for selec-
ted programme.
Lint filter clogged.
Fluff filter clogged.
DELICATE DELICAAT button pressed
and/or load volume too big.
Laundry insufficiently spun.
Particularly high room tempera-
ture. Temporary switching off of
the compressor to avoid overload.
What to do if ...
Turn the programme knob to OFF
UIT. Set the programme again.
Empty condensate tank, then start
programme with START PAUSE
START PAUZE button.
Select time programme or higher
drying level (e.g. EXTRA DRY EXTRA
DROOG instead of CUPBOARD DRY
KASTDROOG).
Clean lint filter.
Clean fluff filter.
Reduce load volume.
Laundry must be adequately spun.
Automatic process, there is no fault
with the appliance. If possible,
lower the room temperature.
25
Hide quick links:
Advertisement
Table of Contents
