Jabra GN 8120 USB Quick Setup Manual

GN 8120 USB – Quick Set Up Guide
Xten ineen Softphone
The GN 8120 USB provide in-line control of basic softphone call functions, such as off-hook/on-hook, volume, and mute,
and incorporate digital signal processing to enhance audio quality. No external drivers are required for integration with the
Xten ineen Softphone basic call controls (Plug and Play).
Required Components:
1 Laptop or PC
2 Available 1.0 or 2.0 USB Port
3
Xten ineen version 1.1
4
GN 8120 USB
5 Any GN Quick Disconnect Headset
GN 2100 – recommended
GN 2200
GN Profile
GN Advantage Plus
Installation:
Step 1 – Set-up the product
Connect GN QD Headset to GN 8120 USB and Plug GN 8120 USB into any available USB port.
Wait for the device to fully install (Plug and Play).
Step 2 – Download the software
Go to: http://www.ineen.com.
Download and Install ineen Softphone for Windows or Mac OS X.
Follow set up instructions.
Note: If ineen does not register, your PC is most likely behind a firewall with enhanced security. Contact your IT department to resolve
this issue, or simple install ineen on a PC that has access to an on open broadband connection (for example a home broadband connection).
Step 3 – Tune the Product
Right mouse click on ineen Softphone surface and select Tuning Wizard.
Tuning Wizard will appear, click next. Select configure only a headset, click next.
Select GN 8120 within the drop down windows for speaker and microphone, click next.
Adjust the volume, click next. Adjust microphone, click next.
Select internet connection speed, click next then finish.
Restart Softphone and GN 8120 USB will function properly.
Basic Call Function Integration:
The GN 8120 USB contains three call function buttons with associated call function LEDs and a volume rocker for adjusting
the audio volume heard on the headset. The mapping between the three function buttons/LEDs and Xten ineen Softphone is
generally as follows:
Functions:
Green button – on-hook/off-hook, answer/hang-up call.
Green button LED – Indication of on-hook/off-hook, incoming call.
White button – Not currently in use – Future.
White button LED –Not currently in use – Future.
Red button – mute on/off.
Multi-Color LED –Indication of mute on/off.
Sound Quality
2
4
) Comfort ) Durability
77 Northeastern Blvd. Nashua, NH 03062
1-800-826-4656 www.gnnetcom.com
3
1
5
Call Function Buttons
Volume
Rocker
Visual LED Alerts
www.gnnetcom.com