Safety Instructions For Basic Thickness Planer Operations; Before Using The Thickness Planer; Before Each Use; Plan Ahead To Protect Your Eyes, Hands, Face And Ears - RIDGID TP1300 Owner's Manual

Safety Instructions for Basic Thickness Planer
Operations

Before Using The Thickness Planer

WARNING: To reduce the risk of
mistakes that could cause seri-
ous, permanent injury, do not
plug the thickness planer in until
the following steps are com-
pleted.
• Completely assemble and align
thickness planer. (See "Assembly"
and "Alignment" sections).

Before Each Use

Inspect your thickness planer.
• Disconnect the thickness planer. To
reduce the risk of injury from acci-
dental starting, unplug the thickness
planer, before changing the setup,
changing the blade or adjusting any-
thing.
Check for Damaged Parts. Check
for:
• Proper alignment of moving parts,
• Damaged electric cords,
• Binding of moving parts,
• Broken parts,
• Stable mounting,
• Other conditions that may affect the
way the thickness planer works.
Before each use, make sure area
under the cutter head and feed rollers
is clear.
If any part of this thickness planer is
missing, bent, or broken in any way,
or any electrical parts don't work, turn
the thickness planer off and unplug it.

Plan Ahead To Protect Your Eyes, Hands, Face and Ears

Know Your Thickness Planer. Read
and understand the owner's manual
and labels affixed to the tool. Learn its
application and limitations as well as
• "See Getting To Know Your thick-
ness Planer" section.
• Review and understand all safety
instructions and operating proce-
dures in this manual.
• Review the maintenance methods
for this thickness planer. (See
"Maintenance" Section).
Replace damaged, missing, or failed
parts before using the thickness
planer again.
To reduce possibility of throwing
pieces, make sure the knives are
properly installed and the knife lock
screws are tight.
Use sharp knives. Dull or knicked
knives tend to "pound" and chew at
the wood, causing kickbacks.
Replace dull or damaged planer
knives.
Make sure the deflector or dust col-
lector is in place.
Keep Guards in Place, in working
order, and in proper adjustment.
Maintain Tools With Care. Keep the
thickness planer clean for best and
safest performance. Follow instruc-
tions for lubricating. DON'T lubricate
any part of the thickness planer while
the knives are rotating.
the specific potential hazards peculiar
to this tool.
To reduce the risk of injury from acci-
dental contact with moving parts,
18