22 electrolux something not working
Malfunction
When pressing a button,
the corresponding
button flashes several
times.
Drum light does not
work
When a button is
pressed, Err appears in
the multi-display.
Programme inactive,
Water r r eservoir f f ull
light illuminated.
Drying cycle ends
shortly after programme
starts. END
light illuminated.
Drying cycle lasts an
unusually long time.
Note:
After around 5 hours
the drying cycle ends
automatically (see
„Drying cycle complete")
Possible cause
Washing protection.
●
After the start of the program-
me, the option can no longer
be set.
Programme selector in 'O"
●
position.
Defective light bulb
●
Washing protection. After the
●
start of the programme, the
option can no longer be set.
Condensate tank is full.
●
Not enough washing loaded
●
or washing loaded is too
dry for selected programme.
Lint filter clogged.
●
Heat exchanger clogged with
●
lint.
DELICATE button pressed
●
and load volume too big.
Load volume too big.
●
Laundry insufficiently
●
predrained.
Solution
Turn the programme knob to
●
OFF. Set the programme
again
Turn programme selector to
●
any programme
Replace light bulb (see next
●
section).
Turn the programme knob to
●
OFF. Set the programme again.
Empty condensate tank, then
●
start programme with
START/PAUSE button.
Select time programme or
●
higher drying level (e.g. EXTRA
DRY instead of STRONG).
Clean lint filter
●
Clean heat exchanger.
●
DELICATE is only suitable for
●
use with loads of up to 3 kg!
Reduce load volume.
●
Laundry must be adequately
●
pre-drained.