System Connections - JBL LS120P Owner's Manual

0012CSK - JBL LS120P OM UK v2.qxp:v 14/01/08 17:12 Side 5

SYSTEM CONNECTIONS

If you have a Dolby ® Digital or DTS ® receiver/processor
with a low-frequency-effects (LFE) or subwoofer output:
Set LFE/Normal switch to "LFE."
LS120P/230
If your receiver/processor does not contain a Dolby Digital
or DTS processor, but has subwoofer outputs:
Set line-level/LFE switch to
"Normal."
LS120P/230
NOTE: If your receiver/processor
has only one sub out, you may
use either the L or R input.
5