Product Overview - First Alert CM480 User Manual

Installing Cameras
Mounting Cameras and Running Cable
Select the position for the camera and secure the camera stand. Screw the camera onto the stand. Adjust camera to the proper
view angle. Make sure the lens is upright relative to the subject. Tighten the thumb bolt. First Alert cameras can be either ceiling or
wall mounted by simply reversing the camera stand mounting. See "Camera Orientation" Info box. Run cable from camera to DVR
location. See Information box below on "Longer Cable Runs".
Connecting Cameras
Follow this diagram to connect camera to a DVR or other device using a BNC connection. Note:
DVR Power Adaptor is for illustration purposes only. Your power adaptor may be different.
Option 1
Power from DVR (Not Supplied)
Power from 120V
CAMERA AND POWER CONNECTIONS
Power to DVR
DC 12V Input
Splitter from DVR
Camera & Power
12V DC
Converter
From DVR

PRODUCT OVERVIEW

Camera Orientation
It's important the camera is mounted correctly
to ensure the image is not upside down as the
camera lens can only be positioned one way.
Longer Cable Runs
Longer cable runs may require an upgrade
to RG59 Coax cable. First Alert kits ship with
economical AV cable that is designed to work
well up to the length of cable provided, usually
around 60 feet. If longer distances between
camera and DVR are required, you will need to upgrade to RG59
Coax cable. We provide several lengths up to 300 feet. In addition, if
you need to run cable for in-wall installations, then you may require
fire rated cable, FT-4/CMR UL approved for in-wall installations.
Power from Supplied Adaptor
Video to DVR
Video In
Power to Camera
AV Cable: BNC/
DC Power
Power to Camera
Video to Camera
Page 5
Option 2
Supplied 12V
DC Adaptor