Related Manuals for GMC BS900M
Summary of Contents for GMC BS900M
- Page 1 MAGNESIUM BELT SANDER BS900M INSTRUCTION MANUAL Black Magenta Code: BS900M Cyan Yellow Date: 060224 Edition: 03 Op: DCR...
-
Page 2: Table Of Contents
Contents Warranty Introduction Environmental protection Description of symbols Specifications Safety instructions Additional safety rules for sanders Unpacking Contents of carton Assembly Know your product Switching on and off Adjusting the speed Attaching a sanding sheet Selecting the right grade of sanding belt Sanding Using the sanding frame Dust extraction... -
Page 3: Introduction
Dear Customer If you require any help with your product, whether it � is a Warranty claim, spare part or user information, � please phone our Help Line for an immediate response. Phone 1300 880 001 in Australia or � 0800 445 721 in New Zealand. -
Page 4: Safety Instructions
Safety instructions WARNING. Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. -
Page 5: Additional Safety Rules For Sanders
• Always switch off before you put the sander down. • Do not force the sander; let the tool do the work at a reasonable speed. Overloading will occur if too much pressure is applied and the motor slows resulting in inefficient sanding and possible damage to the sander motor. -
Page 6: Unpacking
Contents of carton • 2 x 80 Grit sanding belts (1 fitted on product) • Sanding frame • Spare drive belt • Dust canister set • Vacuum adaptor Assembly The Sander is packed, fully assembled, apart from the dust canister. -
Page 7: Know Your Product
Know your product 1. Auxiliary handle 2. Main handle 3. Dust extraction canister 4. Lock-on button 5. On/Off trigger switch 6. Drive roller 7. Belt tension lever 7 10 8. Front belt roller 9. Belt rotation indicator 10. Tracking adjustment knob 11. -
Page 8: Switching On And Off
Switching on and off 1. Pull the on/off trigger (5) upward to start the sander (fig. A). 2. By pulling the switch on and pressing the lock-on button (4), you can lock the sander on (fig. B). 3. Pulling the switch on again and releasing it turns the sander off. -
Page 9: Sanding
2. Turn the sander upside down with the cordset facing you. 3. Screw the knob on the frame all the way in. 4. Fit the frame over the base of the sander taking care that the spigot on the end of the frame knob locates into the... -
Page 10: Dust Extraction
3. Re-lubricate all moving parts at regular intervals. 4. If the body of the sander needs cleaning, wipe it with a soft damp cloth. A mild detergent can be used but nothing like alcohol, petrol or other cleaning agent. - Page 12 Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: GMC Product Type GMC Product Code A GMC Service Engineer will take your call and, in most cases, will be able to solve your problem over the phone.