Your pedicure spa shipped with the seat bottom and seat back already attached to the base. Follow these
instructions to connect the seat back to the pedicure spa:
Step 1: Remove the hitch and clevis pins located
on the seat back mounting bracket on the back of
the chair.
Step 2: Slide the seat bracket into the black end
on the linear actuator, and line up the holes.
Step 3: Slide the clevis pin through the holes and
secure by inserting the hitch pin through the
small hole on the clevis pin.
Document ID: 40080001
A
TTACHING THE
Forte
Rev: F
S
B
EAT
ACK
Altera
Step 1: Remove the hitch and clevis pins located
on the seat back mounting bracket on the back of
the chair.
Step 2: Line up the hole on the seat bracket with
the hole on the cylinder end.
Step 3: Slide the clevis pin through the holes and
secure by inserting the hitch pin through the end
hole on the clevis pin.
Technical Support: 800-626-6912
Page 15 of 24