Trouble Conditions; Check" And "Battery" Displays - First Alert FA142C User Manual

Hide thumbs Also See for FA142C:

Installation instructions manual (94 pages)

Table Of Contents

Table of Contents

"Check" and

he word CHECK on the keypad's display, accompanied by a "beeping" at the keypad,

"Battery" Displays

indicates a trouble condition in the system.

To silence the beeping for these conditions, press any key.

1. A display of "CHECK" and one or more zone numbers indicates that a

problem exists with the displayed zone(s) and requires your attention. If the

CHECK

IMMEDIATELY.

Determine if the zone(s) displayed are intact and make them so if they are not. If the

problem has been corrected, the display can be cleared if you enter the OFF se-

quence (user code plus OFF key) twice. If the display persists, CALL FOR

SERVICE IMMEDIATELY .

2. If there are wireless sensors* in your system, the CHECK condition may

Not all systems use

also be caused by some change in the environment that prevents the receiver from

wireless sensors.

hearing a particular sensor. CALL FOR SERVICE IMMEDIATELY if this

occurs.

IF YOU CANNOT CORRECT A "CHECK"

DISPLAY, OR IF IT IS FOR A FIRE ZONE,

CALL FOR SERVICE IMMEDIATELY.