BT RESPONSE 70 User Manual page 15

Your Response 70 will
announce ...
All messages
deleted
It will then continue
its countdown to 0,
and return to 'answer
on' mode.
If you accidentally delete
all messages, you can
still save them by
pressing the
ANSWER
button before
ON/OFF
countdown reaches 0.
To set the answer
delay
Answer delay sets the
number of times your
Response 70 will ring
before answering a call.
TIME SAVER
Your Response 70 is pre-
set to TIME SAVER.
This means that during
remote access, if any
messages have been
recorded your Response
70 will answer after
only 2 rings. If there
are no messages, it will
answer after 6 rings,
thereby allowing you the
option of hanging up
before your Response 70
answers. In using Time
Saver you can avoid the
cost of a call.
Press and hold the
1
button.
SKIP
SKIP
Your Response 70 will
announce the current
answer delay and the
display will show it in
numbers.
Time Saver
Keep holding the
2
button. Your
SKIP
Response 70 will
announce the answer
delay options ...
Time Saver, 2, 3,
4, 5, 6, 7, 8, 9
When you hear your
3
desired setting,
release the
SKIP
button. After 2
seconds your
Response 70 will
announce the new
answer delay setting
and then return to
'answer on' mode.
Answer delay,
4 rings
To check the
answer delay
setting
Press the
1
SKIP
button.
SKIP
Your Response 70 will
announce the current
delay setting.
13