BT SYNERGY 1000 User Manual page 20

To adjust the base station melody
You can select from four different ringer
melodies.
• Press the button until the display shows
SET UP.
button. Display shows HANDSET.
• Press the
button. Display shows BASE.
• Press the
button. Display shows SECURITY
• Press the
PIN.
• Press the button until the display shows
MELODIES.
• Press the button. Display shows the
current setting A (or B, C, D). The displayed
setting is played.
• Press the button to change the setting.
Display shows the next melody option.
The melody is played.
• Press the button when you want to select a
melody. A beep confirms that the change has
been made.
To switch the keypad beeps on and off
Whenever you press a button on the handset,
you will hear a beep. You can turn this sound on
and off. The original setting is ON.
• Press the button until the display shows
SET UP.
button. Display shows HANDSET.
• Press the
button. Display shows KEYTONES.
• Press the
• Press the button. Display shows the
current setting ON or OFF.
• Press the to change the setting. Display
shows OFF or ON.
• Press the button. A beep confirms that the
change has been made.
To switch the display backlight on and off
• Press the button until the display shows
SET UP.
button. Display shows HANDSET.
• Press the
button. Display shows KEYTONES.
• Press the
• Press the button until the display shows
BACKLIGHT.
• Press the button. Display shows the
current setting ON or OFF.
• Press the to change the setting. Display
shows OFF or ON.
• Press the button. A beep confirms that the
change has been made.
15