Message Alert; Security Code - BT QUARTET 2015 User Manual

To turn the message alert beeps
on and off
Options
At standby, press
display shows ANS MACHINE.
Select . The display briefly shows
OK
OK
MAKING LINK then shows ANSWER.
Options
Press
OPTIONS
ANS SET UP.
Press . The display shows ANSWER
OK
OK
MODE.
Options
Press the
OPTIONS
display reads MESSGE ALERT flashing
alternately with either ON or OFF,
depending on the current setting.
CHANGE Press
CHANGE
ON. The setting shown is the current
setting. If this is what you want, select
.
SAVE
SAVE
Options
If you wish to change the setting, press
the button and the setting
OPTIONS
will change. Voice says 'Message alert
on/off '. The display then returns to
MESSGE ALERT, alternating with the
new setting.
Press and hold
BACK
standby.
until the
OPTIONS
until the display shows
button until the
. Display shows OFF or
to return to
BACK
To set your remote access security
code from your handset
Options
At standby press
display shows ANS MACHINE.
Select . The display briefly shows
OK
OK
MAKING LINK then shows ANSWER.
Options
Press
OPTIONS
ANS SET UP.
Press . Display shows ANSWER MODE.
OK
OK
Press
Options OPTIONS
SECURITY CODE and the current three
digit code. (Default code is 000.)
CHANGE Press
CHANGE
three digit code with the first digit
flashing. If you wish to retain the
existing code, select
SAVE
If not, enter a new number, then press
SAVE . Voice says 'Security code setting
SAVE
XXX'
and the display returns to SECURITY
CODE showing the new setting.
Wait 20 seconds or press and hold
BACK
to return to standby.
until the
OPTIONS
until display shows
until the display shows
. Display repeats the
.
SAVE
BACK
27