Backlight Time; Dim Mode; Auto Hang Up - BT HUDSON 1100 User Manual

Backlight time

Adjust the amount of time before the handset backlight switches off to
save battery power when in idle. Choose from 20, 40 or 60 seconds.
1. Press Menu, scroll
press SeleCt.
2. Scroll to
BACklight
3. Scroll or to display
and press SeleCt.
60 SeConDS
4. Press to return to the previous menu level.
BACk

Dim mode

When dim mode is set to on (the default setting) and no buttons
have been pressed on the handset for the set backlight time out
(see above), the time will appear on the handset standby display.
To conserve battery power, you can turn the dim mode off and
the screen will then switch off and go completely blank, instead of
displaying the time. When any button is pressed on the handset,
the display will switch back on.
1. Press Menu, scroll
press SeleCt.
2. Scroll to MoDe, press SeleCt.
DiM
3. Scroll or to display
4. Press to return to the previous menu level.
BACk
Auto hang-up
With Auto hang up switched on, you can end a call by placing the
handset on the base or charger. If you switch this off, you must
always press to hang up.
1. Press Menu, scroll
press SeleCt.
2. Scroll to
Auto
3. Scroll or to display
4. Press to return to the previous menu level.
BACk
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
to
hAnDSet SettingS
tiMe, press SeleCt.
20 SeConDS,
to
hAnDSet SettingS
or and press SeleCt.
on off
to
hAnDSet SettingS
hAng-up, press SeleCt.
or and press SeleCt.
on off
and
or
40 SeConDS
and
and
The default setting is 20 seconds.
The default setting is ON.
The default setting is ON.
If you have auto hang-up set to off,
you can place the handset in the
charger and have a handsfree call, if
the battery charge is low.
24