Adding Point Of Interest (Poi) Coordinates; Manually - Suunto Ambit 2.0 User Manual

TIP: You can create POIs in Movescount by selecting a location on a map or
inserting the coordinates. POIs in your Suunto Ambit and in Movescount are always
synchronized when you connect the device to Movescount.
8.3.2 Adding point of interest (POI) coordinates manually
You can save a location other than your current location as a POI by entering
the coordinates manually.
To manually add the coordinates of a location:
1. Press [Start Stop] to enter the start menu.
2. Scroll to
NAVIGATION
3. Press [Next] to select POIs (Points of interest). The device shows the
number of POIs currently stored in the device and the amount of space
available for new POIs.
4. Scroll to Define location using [Light Lock] and select with [Next]. The
device shows the coordinates of the location where the last GPS fix was
taken.
5. Edit the latitude values with [Start Stop] and [Light Lock]. Accept the values
with [Next].
6. Edit the longitude values with [Start Stop] and [Light Lock]. Accept the
values with [Next].
7. Select a suitable POI type for the location. Scroll through the POI types with
[Start Stop] or [Light Lock]. Select a POI type with [Next].
8. Select a suitable name for the location. Scroll through the name options
with [Start Stop] or [Light Lock]. Select a name with [Next].
9. Press [Start Stop] to save the POI.
32
using [Start Stop] and select with [Next].