Speaker System Overview; Setting Up - Logitech Z-540 User Manual

Z-540 manual.qxd 8/6/01 11:38 AM
Congratulations on your purchase of the Z-540 speaker system from Logitech
amazed at what you'll hear as you intensify your PC audio experience. To discover more
Logitech products, visit us on the web at www.logitech.com.
®
1. Subwoofer
2. Left front speaker –
yellow plug
3. Left rear speaker –
white plug
4. Power cord
5. Right rear speaker –
red plug
6. Audio input cable to
PC – green & black
plugs
7. Right front speaker
8. Subwoofer volume
A. M3D ™
B. Fader
C. Power
D. System volume
6
1
English
Page 2 Beth Hecht SHARE:Graphics:InProcess: Logitech Brand:Manuals:Z-540 Logitech Manual:
® . You'll be
1
8
2
7
- +
SUB
VOLUME
FRONT RIGHT
4
5
A
D
C
Setting up your Logitech
Referring to the diagram on the previous page, do the following:
• Insert the colored plugs from each satellite speaker into the corresponding colored
jacks on the back of the subwoofer. Connect the DIN plug from the right front speaker
to the subwoofer as shown, being careful to align the pins before inserting the plug.
• 4-channel sound card: connect the green plug from the audio input cable to the front
jack and the black plug into the rear jack into your sound card.
• 2-channel sound card: connect the green plug from the audio input cable to the "line
out" jack on your sound card. Enable M3D
• Plug the power cord into an electrical outlet.
Enjoying your Logitech Z-540 speakers—
®
Power
To turn on/off system power, press the Power button on the right front speaker.
System Volume
With the computer running and an audio source active, adjust the system volume using
the knob on the right front speaker.
Subwoofer Volume
With the computer running and an audio source active, adjust the subwoofer volume on
3
the back of the subwoofer.
M3D ™
M3D ™ gives very realistic surround sound to material recorded in stereo – such as CDs,
MP3s and older games. To enable, press the M3D
your speakers are connected to a 2-channel sound card, we recommend that you use
M3D ™ at all times. If you're using a 4-channel card, you can experiment with M3D
the sound you prefer.
B
Fader
To balance the output between the front and rear speakers, turn the fader knob on the
right front speaker.
® Z-540 speakers—
™ for the best sound.
button on the right front speaker. If
™
™ to find
2
English