Yamaha YZF-R1 Owner's Manual page 55

1. Cowling B
2. Quick fastener
2. Disconnect the turn signal light
lead coupler.
1. Turn signal light lead coupler
To install the cowling
1. Connect the turn signal light lead
coupler.
PERIODIC MAINTENANCE AND MINOR REPAIR
2. Fit the projections on the cowling
into the slots and slide it forward.
1. Slot
2. Projection
3. Install the quick fasteners and the
quick fastener screws.
Cowling C
To remove the cowling
1. Remove cowling A. (See page
6-6.)
2. Remove the bolts and the quick
fastener screws.
6-7
1. Bolt
2. Quick fastener screw
3. Cowling C
3. Slide the cowling backward to un-
hook its projections from the slots,
and then pull the cowling off.
EAU42951
1. Cowling C
2. Slot
3. Projection
6