Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Electrolux FAVORIT 50875
Summary of Contents for Electrolux FAVORIT 50875
- Page 1 FAVORIT 50875 User manual Dishwasher...
-
Page 2: Table Of Contents
Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. -
Page 3: Operating Instructions
Safety information Operating instructions Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. -
Page 4: Installation
Product description • Keep children well away from the dishwasher when the door is open. Installation • Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged contact your supplier. • All packaging must be removed before use. •... -
Page 5: Control Panel
Control panel Rinse aid dispenser Rating plate Filters Lower spray arm Upper spray arm Control panel On/Off button Programme selection buttons Delay start button Indicator lights Digital display Function buttons Indicator lights Programme in progress Illuminates when a washing programme is set and remains illuminated for all the duration of the washing programme. -
Page 6: The Digital Display
First use Indicator lights Salt Illuminates when the special salt has run out. Rinse aid Illuminates when the rinse aid has run out. 1) The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and/or rinse aid is necessary. -
Page 7: Set The Water Softener
Set the water softener • Ensure that the electrical and water connections comply with the installation instruc- tions • Remove all packaging from inside the appliance • Set the water softener • Pour 1 litre of water inside the salt container and then fill with dishwasher salt •... -
Page 8: Setting Electronically
Use of dishwasher salt 1. Open the dishwasher door. 2. Remove the lower basket from the dish- washer. 3. Turn the water hardness dial to position 1 or 2 (see table). 4. Replace the lower basket. Setting electronically The dishwasher is factory set at level 5. 1. -
Page 9: Use Of Rinse Aid
Use of rinse aid 3. Using the funnel provided, pour in the salt until the container is full. 4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket. 5. Replace the cap tightly turning it clock- wise until it stops with a click. -
Page 10: Adjusting The Dosage Of Rinse Aid
Daily use 2. Add the rinse aid in the container. The maximum level for filling is indicated by "max". The dispenser holds about 110 ml of rinse aid, which is sufficient for between 16 and 40 dishwashing cycles, depending upon the dosage setting. -
Page 11: Load Cutlery And Dishes
Load cutlery and dishes Load cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher. • Before loading the dishes, you should: – Remove all left over food and debris. –... -
Page 12: The Lower Basket
Load cutlery and dishes The lower basket Load larger and heavily soiled dishes and pans in the lower basket. To make it easier to load larger dishes, the 2 plate racks on the right in the lower basket can be folded down. -
Page 13: The Upper Basket
Load cutlery and dishes 1. Place the grid insert on the cutlery basket. 2. Place forks and spoon in the cutlery basket with their handles pointing downwards. For larger utensils, such as whisks, leave off one half of the cutlery grid. The upper basket Load smaller, fragile crockery and long, sharp cut- lery in the upper basket. -
Page 14: Adjusting The Height Of The Upper Basket
Use of detergent • The cup racks can be folded up out of the way for tall crockery items. • Lay or hang wine and brandy glasses in the slots in the cup racks. Adjusting the height of the upper basket Maximum height of the dishes in: the upper basket the lower basket... -
Page 15: Fill With Detergent
Use of detergent Fill with detergent 1. Open the lid. 2. Fill the detergent dispenser (1) with deter- gent. The marking indicates the dosing levels: 20 = approximately 20 g of detergent 30 = approximately 30 g of detergent. 3. All programmes with prewash need an ad- ditional detergent dose (5/10 g) that must be placed in the prewash detergent cham- ber (2). -
Page 16: Multitab Function
Multitab function Multitab function This appliance is equipped with the "Multitab function", that allows the use of the "Multitab" combi detergent tablets. These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose ("3 in 1", "4 in 1", "5 in 1"... -
Page 17: Washing Programmes
Washing programmes If you decide to turn back to the use of standard detergent system we advise that you: 1. Deactivate the "Multitab function". 2. Fill up the salt container and the rinse aid dispenser again. 3. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. -
Page 18: Select And Start A Washing Programme
Select and start a washing programme Select and start a washing programme Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. -
Page 19: Unloading The Dishwasher
Unloading the dishwasher • The dishwasher will automatically stop. • The light of the programme just ended will remain on. • In the digital display appears a zero. 1. Switch off the dishwasher by pressing the On/Off button. 2. Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes;... -
Page 20: Cleaning The Spray Arms
Care and cleaning 2. The dishwasher filter system comprises a coarse filter ( A ), a microfilter ( B ) and a flat filter. Unlock the filter system using the handle on the microfilter, and remove the filter system. 3. Turn the handle about 1/4 a turn anti- clockwise and remove the filter system. -
Page 21: External Cleaning
What to do if… If residues of soil have clogged the holes in the spray arms, remove them with a cocktail stick. External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. - Page 22 What to do if… Fault code and malfunction Possible cause and solution • The water tap is blocked or furred with lime- appears in the digital display. scale. The dishwasher does not fill with water. Clean the water tap. • The water tap is turned off. Turn the water tap •...
-
Page 23: Technical Data
Technical data The wash results are not satisfactory The dishes are not clean • The wrong washing programme has been se- lected. • The dishes are arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. - Page 24 Hints for test institutes Full load: 12 standard place settings Rinse aid setting: position 4 (Type III) Example loading arrangements: Upper basket Lower basket with cutlery basket Cutlery basket 1) If there are cup racks in place on the lefthand side, remove them.
-
Page 25: Installation Instructions
Installation Installation instructions Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Building-in This dishwasher is designed to be fitted under a kitchen counter or work surface. - Page 26 Installation Adjusting the height of the plinth It is important for the dishwasher to be abso- lutely horizontal so that the door seals properly. The adjustable feet are to be turned to the left or right until the dishwasher is horizontal. If there is a space at the bottom of the machine, this can be covered by lowering the plinth.
-
Page 27: Water Connection
Water connection washer since this could damage the hydraulic components. WARNING! The dishwasher must be secured to the underside of the worktop or to adjacent units by using the brackets supplied. Neglect to do this can cause injury or damage. Under no cir- cumstances may holes be drilled through the sides of the dishwasher since this could dam- age the hydraulic components. -
Page 28: Water Outlet Hose Connection
Water connection WARNING! Warning! Dangerous voltage. Water outlet hose connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. -
Page 29: Electrical Connection
Electrical connection To avoid water leakage after installation make sure that the water couplings are tight. Electrical connection WARNING! Safety standards require the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. - Page 32 www.electrolux.com...