Adjusting The Level - Samsung Mid462-Ut2 Installation Manual

SAMSUNG Video Wall Kit Setup Guide

Adjusting the Level

1. Place the product on a flat surface (floor).
2. Level the product using the 4 Level Adjusters at the front and back of the product using the L-shape wrench.
3. Level the product by turning the 2 Level Adjusters on both sides of the product.
4. You must the level the product using the level gauge spirit level so that the angles of the sides and the top
are within a range of 89.8~90.2 degrees.
➣
If the vertical angle is not within the 89.8~90.2 degree range, the monitors may fall when they are piledup. Ensure
that the angle is within the range.
Matrix_ID-Eng.indd Sec1:5 Matrix_ID-Eng.indd Sec1:5
5
2. Installation
2010-06-08 2010-06-08 3:36:28 3:36:28