AEG FAVORIT 50863 Instruction Book page 11

117998 91/0 21-04-2006
Activation/deactivation of the 3 in 1 function
(The dishwasher must be switched off)
1. Press the On/Off button. The indicator lights of the programme
selection buttons will illuminate (setting mode).
If only one programme selection button indicator light is
illuminated, this means that a washing programme is set.
The programme must be cancelled: press simultaneously function
buttons 2 and 3 for about 2 seconds, the indicator light
of the set programme button starts flashing. After about 2 seconds
the indicator lights of all the programme selection buttons will
illuminate; this means that the set washing programme has been
cancelled and the machine is now in setting mode.
2. Press simultaneously function buttons 2 and 3, until the indicator
lights of function buttons 1, 2, 3 and 4 start flashing.
3. Press function button 4, the indicator lights of function buttons 1,
2 and 3 turn off while the indicator light of function button 4 goes
on flashing.
4. Press function button 4 again, the "3 in 1" indicator light
illuminates, indicating that the "3 in 1 function" is active.
To deactivate the function press function button 4 again, the
indicator light turns off.
3 in 1 function active
3 in 1 function not active
5. To memorise the operation, switch off the dishwasher by pressing
the On/Off button or wait about 60 seconds after which the
dishwasher will automatically return to setting mode.
14:46 Pagina 11
Operating instructions
indicator light on
indicator light off
11