Toyota FJ Cruiser User Manual page 197

05 11.29
The accessory meter provides the fol-
lowing information.
1. Compass
(For details, see "—Compass" on page
184 in this Section.)
2. Outside temperature
(For details, see "—Outside tempera-
ture display" on page 184 in this Sec-
tion.)
3. Clinometer
(For details, see "—Clinometer"
page 188 in this Section.)
When the ignition switch is turned to
"ON", the last previously used mode dis-
played just before the ignition switch is
turned off will appear.
If the electrical power source has been
disconnected from the accessory meter,
the display will automatically be set to the
initial mode.
"E/M" button
This button is used to switch between
English/U.S. Customary
metric units of the outside temperature
display.
Each time you push this button, the dis-
play switches. The display variations are
as follows;
Indication
on
English/U.S. Customary
System (E)
Metric (M)
The initial mode will be English/U.S. Cus-
tomary System units, however, if the unit
is switched to metric and the ignition
switch is off, it will display metric units
when the ignition switch is turned to "ON".
"SET" button
This button is used to calibrate the
compass
For details, see "—Compass" on page 184
in this Section.
CAUTION
System and
Do not adjust the display while the
vehicle is moving. Be sure to adjust
the display only when the vehicle is
stopped.
Outside
temperature
_F
_C
2007 FJ CRUISER from Jan. '06 Prod. (OM35857U)
183