AOpen AX37 PRO Online Manual page 12

Motherboard
Hide thumbs Also See for AX37 PRO:
Table of Contents

Advertisement

A
X
3
7
P
l
u
s
/
A
X
3
A
X
3
7
P
l
u
s
/
A
X
3
Memory
With VIA Apollo Pro266 chipset, the AX37 Plus/AX37 Pro can support
interface allows zero wait state bursting between the DRAM and the data buffers at 66/100/133MHz. The six banks of DDR DRAM
can be composed of an arbitrary mixture of 1M/2M4M/8M/16M/32M/64MxN DRAMs and maximum up to 3GB. The AX37 Plus/AX37
Pro allows DRAMs can run either synchronous or pseudo-synchronous mode with the host CPU bus frequency (66/100/133MHz).
Ultra DMA 33/66/100 Bus Mater IDE
Comes with an on-board PCI Bus Master IDE controller with two connectors that supports four IDE devices in two channels,
supports
Ultra DMA
33/66/100, PIO Modes 3 and 4 and Bus Master IDE DMA Mode 4, and supports Enhanced IDE devices.
On-board ATA/100 IDE RAID (AX37 Plus Only)
1.
Supports data striping (RAID 0) and mirroring (RAID 1). Provides dramatic increase in drive performance and/or fault tolerant
options. Offers performance customization and data rebuilds from the BIOS menu. Mirroring supports automatic background
rebuilds. Fault tolerance can be restored automatically without rebooting.
2.
Supports up to four IDE drives which capacities are more than 8.4GB on the two IDE RAID connectors while still supporting
four IDE devices on the motherboard. The burst data transfer rates can up to 100MB/s from ATA/100 drives to boot overall
system performance.
3.
Supports IDE Bus Master operation allows multi-tasking during disk drives transfer which increase CPU efficiency, then the
CPU is free to process task during IDE data transfer through PCI bus interface to/from system memory.
7
P
r
o
7
P
r
o
Double-Data-Rated (DDR)
12
O
n
l
i
n
e
M
a
n
u
a
l
O
n
l
i
n
e
M
a
n
u
a
l
SDRAM. The DDR DRAM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ax37 plus

Table of Contents