Chrysler SRT Viper Owner's Manual page 36

34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
5. Position the lap belt across your thighs, below your
abdomen. To remove slack in the lap belt portion, pull
up a little on the shoulder belt, as shown.
Removing Slack From Belt
6. To loosen the lap belt if it is too tight, lift up on the
shoulder belt and pull on the lap belt. A snug belt
reduces the risk of sliding under the belt in an
collision.
WARNING!
• A lap belt worn too high can increase the risk of
injury in a collision. The belt forces won't be at the
strong hip and pelvic bones, but across your abdo-
men. Always wear the lap part of your seat belt as
low as possible and keep it snug.
• A twisted belt may not protect you properly. In a
collision, it could even cut into you. Be sure the belt
is straight. If you can't straighten a belt in your
vehicle, take it to your authorized dealer immedi-
ately and have it fixed.