Table of Contents
Advertisement
16 electrolux
Problem
The appliance does not
fill with water.
The appliance does not
drain the water.
The appliance door is
open or not closed
correctly.
The anti-flood device is
on.
The spin phase does
not operate.
The programme does
not start.
There is water on the
floor.
Possible cause
The water tap is closed.
The water inlet hose is dam-
aged.
The filters in the water inlet
hose is blocked .
The water tap is blocked or is
furred with limescale.
The connection of the water
inlet hose is not correct.
The water pressure is too low.
The water drain hose is dam-
aged.
The filter of the drain pump is
blocked.
The connection of the water
drain hose is not correct.
A washing programme without
the drain phase is set.
The function Rinse & Hold is
on.
The spin phase is off.
The filter of the drain pump is
blocked.
Balance problems with the
laundry load.
The mains plug is not connec-
ted in the mains socket.
Blow out fuse in the household
fuse box.
You did not press button
The delay start is set.
The Child Lock function is acti-
vated.
Leakages from the couplings
of the water hoses.
Leakages from the drain
pump.
Possible solution
Open the water tap.
Make sure that the water inlet hose has
no damages.
Clean the filters. Refer to 'Care and
cleaning'.
Clean the water tap.
Make sure that the connection is cor-
rect.
Contact your local water authority.
Make sure that the water drain hose has
no damages.
Clean the filter of the drain pump. Refer
to 'Care and cleaning'.
Make sure that the connection is cor-
rect.
Set the drain programme.
Set the drain programme.
Close the door correctly.
• Disconnect the appliance.
• Close the water tap.
• Contact the service centre.
Set the spin programme.
Clean the filter of the drain pump. Refer
to 'Care and cleaning'.
Adjust manually the items in the tub and
start the spin phase again.
Put in the mains plug.
Replace the fuse.
4
4
.
Press button
To start immediately the programme,
cancel the delay start.
Deactivate the Child Lock function.
Make sure that the couplings are tight.
Make sure that the drain pump filter is
tight.
.
Advertisement
Table of Contents
