What To Do If; Resetting The Language - AEG FAVORIT 88080 i User Information

What to do if ...

Resetting the language

You can reset the language of the display to the factory setting at any
time. As well as the language, the CONTRAST
are also reset.
1. Press the RESET button repeatedly until the display in the display no
longer changes.
2. Press and hold the RESET button for six seconds.
In the text line LANGUAGE ENGLISH appears. The word ENGLISH flash-
es.
3. Using the direction buttons
4. Press the OK/START button.
5. If required, adjust the values for CONTRAST
section "Basic operation".
If one of the following fault messages is displayed in the display during
operation:
– OPEN THE TAP
– DRAIN BLOCKED
Remedy the fault, then re-start the dishwashing cycle. The cycle will
continue.
In the case of other fault messages:
– Cancel the dishwashing cycle.
– Switch the appliance off and on again.
– Select dishwashing cycle.
– Press the OK/START button.
If the fault is displayed again, please contact the Customer Care De-
partment and inform them of the fault message.
1. not available with all models
1
and BRIGHTNESS settings
or select the desired language.
1
to BRIGHTNESS; see the
37