Door Reversibility - Electrolux TG09111 User Manual

18 www.electrolux.com

DOOR REVERSIBILITY

1
2
To carry out the following opera-
tions, we suggest that this be
made with another person that will
keep a firm hold on the doors of
the appliance during the opera-
tions.
To change the opening direction of the
door, do these steps:
• Remove the plug from the power socket.
• Tilt back the appliance carefully so that
the compressor cannot touch the floor.
• Unscrew the left foot.
• Remove the lower door hinge by un-
screwing the 2 retaining screws.
• Remove the hinge pin from the bottom
of the door.
• Slot the hinge pin into the hole in the
hinge plate.
• Take the door off.
• Refit the upper hinge pin into the oppo-
site location.
• Fit the door in place on the hinge pin.
• Slot the hinge pin into the hole in the
hinge plate and relocate the hinge as-
sembly to the opposite location and refit
using the retaining screws.
• Refit the bottom hinge plate assembly on
the opposite side, taking care that the
edge of the door is parallel with the side
of the cabinet.
• Remove and install the handle (if fore-
seen)on the opposite side.
• Reposition, level the appliance, wait for
at least four hours and then connect it to
the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The door opens and closes correctly.