What To Do If - AEG COMPETENCE B9831-4 Operating Instructions Manual

What to do if ...

Problem
The oven is not heating
up
The oven lighting is not
operating
F11 appears in the clock
display
A fault code that is not
listed above appears in
the clock display
If you are unable to remedy the problem by following the above
suggestions, please contact your dealer or the Customer Care De-
partment.
1
Warning! Repairs to the appliance are only to be carried out by quali-
fied service engineers. Considerable danger to the user may result from
improper repairs.
56
Possible cause
The oven has not been
switched on
The clock has not been set
The required settings have
not been set
Oven safety cut-out has
been triggered
The house wiring fuse (in the
fuse box) has tripped
The oven light bulb is faulty
The meat probe has short
circuited or the plug of the
meat probe is not firmly in
position in the socket
Electronic fault
Remedy
Switch oven on
Set the current time on the
clock
Check the settings
See Oven Safety Cut-out
Check fuse. If the fuses trip
several times, please call a
qualified electrician
Replace oven light bulb
Insert the meat probe plug
into the socket on the oven
side wall as far as it will go.
Switch the appliance off and
on again via the house fuse
or the safety switch in the
fuse box.
If it is displayed again, please
contact the Customer Care
Department