GE Digital Energy LP 11 Operating Manual page 36

ENVIRONMENT
Ambient temperature range
Audible noise at 1 meter
Approvals
CONTROLS, INDICATORS AND ALARMS
Frontpanel with:
LED green
LED red
LCD screen
Push-buttons
Buzzer
(resettable with push-button 'reset')
Rear panel with:
MCB switch
MCB switch
MCB switch
Manual bypass switch
9-pole female sub-D connector
Option slot (middle)
Option slot (right)
Emergency shutdown connection
Battery extension signal connection
I/O terminals
OPM_LPE_11X_3K0_10K_1GB_V041
: -10°C to +40°C
: 40 - 50 dB(A) with linear load (load and temperature dependent)
: safety: EN 50091-1; IEC 950; pending
EMC: EN 50091-2
: operation
: alarm
: 2 x 16 characters, shows system data, status messages, alarm messages,
settings. Language is user selectable.
: up, enter/reset, down
: alarm
: UPS on/off
: Mains on/off
: Static Bypass on/off
: for testing and maintenance purposes
: RS232 interface
contact interface: bypass active, battery low, general alarm, mains failure
: optional plug-in SNMP Card or optional Relay Card
: optional plug-in RPA-Card (Redundant Parallel Architecture)
35
GE DE LP 11 UPS: User manual 4.1 (GB)