INSTRUMENT AND CONTROL FUNCTIONS
Kickstarter
1
1
2
3
4
1. Kickstarter
If the engine fails to start by pushing the
5
start switch, try to start it by using the
kickstarter. To start the engine, fold out
6
the kickstarter lever, move it down light-
ly with your foot until the gears engage,
7
and then push it down smoothly but
forcefully. This model is equipped with
a primary kickstarter, allowing the en-
8
gine to be started in any gear if the
clutch is disengaged. However, shifting
9
the transmission into the neutral posi-
tion before starting is recommended.
EAU13660
Seat
To remove the seat
Remove the bolts, and then pull the
seat off.
1
(×2)
1. Bolt
To install the seat
1. Insert the projection on the front of
the seat into the seat holder as
shown.
EAU13970
1. Projection
2. Seat holder
2. Place the seat in the original posi-
NOTE:
Make sure that the seat is properly se-
cured before riding.
3-8
2
1
tion, and then tighten the bolts.