Yamaha TDM900 Owner's Manual page 59

For TDM900
2
3
1. Coolant reservoir
2. Maximum level mark
3. Minimum level mark
For TDM900A
1. Maximum level mark
2. Coolant reservoir
3. Minimum level mark
PERIODIC MAINTENANCE AND ADJUSTMENT
3. If the coolant is at or below the
minimum level mark, remove pan-
el B for TDM900 or panel A for
TDM900A (See page 6-7.), re-
move the reservoir cap, add cool-
ant to the maximum level mark,
1
and then install the reservoir cap
and the panel. WARNING! Re-
move only the coolant reservoir
cap. Never attempt to remove
the radiator cap when the en-
gine is hot.
coolant is not available, use dis-
tilled water or soft tap water in-
stead. Do not use hard water or
salt water since it is harmful to
1
the engine. If water has been
used instead of coolant, replace
2
it with coolant as soon as possi-
3
ble, otherwise the cooling sys-
tem will not be protected against
frost and corrosion. If water has
been added to the coolant, have
a Yamaha dealer check the anti-
freeze content of the coolant as
soon as possible, otherwise the
effectiveness of the coolant will
be reduced.
For TDM900
1. Coolant reservoir cap
NOTICE: If
[EWA15161]
For TDM900A
1. Coolant reservoir cap
[ECA10472]
6-13
1
1
Coolant reservoir capacity (up to the
maximum level mark):
0.25 L (0.26 US qt, 0.22 Imp.qt)
2
3
4
5
6
7
8
9