Adjusting The Engine Idling Speed - Yamaha TDM900 Owner's Manual

1
1. Fuel tank breather/overflow hose
2. Fuel hose
1
1. Original position (paint mark)
11. Install the fuel tank bolts.
12. Install the rear brake fluid reservoir
holder by installing the bolt.
13. Install the panels and cowlings.
14. Install the seat.
PERIODIC MAINTENANCE AND ADJUSTMENT
Adjusting the engine idling
speed
2
The engine idling speed must be
checked and, if necessary, adjusted as
follows at the intervals specified in the
periodic maintenance and lubrication
chart.
The engine should be warm before
making this adjustment.
Check the engine idling speed and, if
necessary, adjust it to specification by
turning the idle adjusting screw. To in-
crease the engine idling speed, turn the
screw in direction (a). To decrease the
engine idling speed, turn the screw in
direction (b).
6-14
EAU34301
(b)
1
1. Idle adjusting screw
Engine idling speed:
1100–1200 r/min
TIP
If the specified idling speed cannot be
obtained as described above, have a
Yamaha dealer make the adjustment.
(a)
2
3
4
5
6
7
8
9