Anti-Theft Alarm (Optional); Handlebar Switches - Yamaha FJR1300 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
CAUTION:
_
If the clock indicates an error code,
the motorcycle should be checked
as soon as possible in order to
avoid engine damage.
_
3
Clock mode
To set the clock:
1. Push the "SELECT" button and
"RESET" button together for at
least two seconds.
2. When the hour digits start flashing,
push the "RESET" button to set
the hours.
3. Push the "SELECT" button, and
the minute digits will start flashing.
4. Push the "RESET" button to set
the minutes.
5. Push the "SELECT" button and
then release it to start the clock.
ECA00100

Anti-theft alarm (optional)

This motorcycle can be equipped with
an optional anti-theft alarm by a
Yamaha dealer. Contact a Yamaha
dealer for more information.
EAU00109
1. Pass switch "
2. Windshield position adjusting switch "
3. Dimmer switch "
4. Turn signal switch "
5. Horn switch "

Handlebar switches

Pass switch "
Press this switch to flash the headlight.
Dimmer switch "
Set this switch to "
beam and to "
3-5
"
"
/ "
/ "
"
EAU00118
EAU00119
"
EAU03888
/ "
" for the high
" for the low beam.