Yamaha FJR1300A Owner's Manual page 25

TIP
G
To switch between the two instan-
taneous fuel consumption dis-
plays, push the reset button for 1
second when either display is
shown.
G
If traveling at speeds under 10
km/h, "_ _._" will be displayed.
Average fuel consumption mode
1. Average fuel consumption
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
can be set to either "AV_ _._ km/L" or
"AV_ _._ L/100 km".
INSTRUMENT AND CONTROL FUNCTIONS
When the average fuel consumption
mode is selected, the display flashes
for five seconds, and then, depending
on the unit set, "AV_ _._ km/L" (aver-
age distance that can be traveled using
1.0 L of fuel) or "AV_ _._ L/100 km" (av-
erage amount of fuel necessary to trav-
el 100 km) is displayed.
To reset the average fuel consumption
display, push the reset button to select
the mode again, and then push the re-
set button for 1 second while the dis-
play is flashing.
TIP
G
To switch between the two aver-
age fuel consumption displays,
push the reset button for 1 second
when either display is shown.
G
After resetting an average fuel
consumption display, "_ _._" will
be shown for that display until the
vehicle has traveled 1 km.
NOTICE
If there is a malfunction, "– –.–" will
be displayed. Have a Yamaha dealer
check the vehicle.
3-10
Ambient temperature,
neous fuel consumption and aver-
age fuel consumption modes (for
the UK only)
1. Ambient temperature/instantaneous fuel
consumption/average fuel consumption
2. Select button
3. Reset button
Push the reset button to switch the dis-
play between the ambient temperature
mode "Air", the instantaneous fuel con-
sumption mode "MPG" and the aver-
age fuel consumption mode "AV_ _._
MPG" in the following order:
ECA15472
Air → MPG → AV_ _._ MPG → Air
instanta-
3