Yamaha FJR1300AS 2011 Owner's Manual page 25

segments will start flashing. If this oc-
curs, have a Yamaha dealer check the
electrical circuit.
Coolant temperature meter
1. Coolant temperature meter
The coolant temperature meter indi-
cates the temperature of the coolant.
The coolant temperature varies with
changes in the weather and engine
load. If the top segment flashes, stop
the vehicle, then stop the engine, and
let the engine cool. (See page 6-36.)
When the key is turned to "ON", all dis-
play segments come on once in order
to test the electrical circuit.
INSTRUMENT AND CONTROL FUNCTIONS
NOTICE
Do not continue to operate the en-
gine if it is overheating.
Transmission gear display
1. Transmission gear display
2. Neutral indicator light " "
This display shows the selected gear.
The neutral position, however, is not
displayed, it is indicated by the neutral
indicator light.
To avoid damaging the YCC-S clutch,
the display flashes when it is necessary
to downshift. If this occurs, downshift
until the display stops flashing.
3-10
ECA10021 Ambient temperature,
neous fuel consumption and aver-
age fuel consumption
(except for the UK)
1. Ambient temperature/instantaneous fuel
consumption/average fuel consumption
2. Select button
3. Reset button
Push the reset button to switch the dis-
play between the ambient temperature
mode "Air", the instantaneous fuel con-
sumption mode "km/L" or "L/100 km"
and the average fuel consumption
mode "AV_ _._ km/L" or "AV_ _._ L/100
km" in the following order:
Air → km/L or L/100 km → AV_ _._
km/L or AV_ _._ L/100 km → Air
instanta-
modes
3