Clock Functions - AEG Electrolux B 89090-5 Operating Instructions Manual

Clock Functions

MINUTE MINDER
To set a countdown. A signal sounds after the time has elapsed.
This function does not affect the functioning of the oven.
DURATION
To set how long the oven is to be in use.
END
To set when the oven is to switch off again.
HEAT+HOLD
To activate the HEAT+HOLD function, when it has been set "ON" in the "SETTINGS MENU"
TIME OF DAY
To set, change or check the time
(See also section "Before Using for the First Time").
Information about the clock functions
• After a clock function has been selected, the corresponding symbol flashes for about 5 seconds.
During this time, the desired times can be set or modified using the
• When the desired time has been set, the corresponding symbol continues to flash for approx.
5 seconds. After this the symbol lights up.
The set time begins to run.
Using residual heat with the DURATION
When the DURATION
elements off, when 90% of the time set or calculated has elapsed. The residual heat present is used to
continue the cooking process until the time set has elapsed (3 to 20 mins.).
The clock functions display shows the period of operation for the selected oven function,
if none of the clock functions MINUTE MINDER
and END clock functions are used, the oven switches the heating
and END clock functions
, DURATION
29
or button.
or END is set.