Table of Contents
Advertisement
The control indicators have the following meanings:
3 IN 1
1) These control indicators are never illuminated while a dishwashing cycle is running.
Prior to Using for the First Time
1. Set the water softener
2. Fill up with special salt for water softeners
3. Fill up with rinse aid
3
If you wish to use 3in1 detergent:
First read the section "Using 3in1 detergents".
1. Press the ON/OFF button.
3
If indicators for the programme buttons are lit, a dishwashing cycle is
activated. The cycle must be deactivated:
Press function buttons 2 and 3 simultaneously for approx. 2 seconds.
All other indicators will go out.
2. Press function buttons 2 and 3 simultaneously and keep them pressed.
The LED indicators for function buttons 1 to 4 will flash.
3. Press function button 4.
The indicator 3 in 1 will display the current setting:
3 in 1
Indicator
3 in 1
Indicator
4. Pressing function button 4 changes the setting.
5. When the indicator 3 in 1 setting is correct, press the ON/OFF button.
The setting is now saved.
Before the start of the dishwashing cycle put 3in1 detergent in the de-
tergent dispenser.
1)
1)
3 in 1-function activated:
– the inflow of special salt and rinse aid is supressed.
is lit:
– lack of special salt and rinse aid will not be indicat-
ed.
3 in 1-function deactivated
is not lit:
(factory setting)
Refill with special salt
Refill with rinse aid
3 in 1 function activated
7
Advertisement
Table of Contents
