Installing The Dishwasher - AEG FAVORIT 65070 U User Information

Installing the Dishwasher

• The dishwasher must be installed on a firm floor and adjusted to en-
sure that it is stable and level in all directions.
• To compensate for unevenness in
the floor and to match the height
of the appliance to that of sur-
rounding units, extend the thread-
ed feet using a screwdriver.
• Adjust the rear feet of the appli-
ance using a screwdriver from the
front of the appliance. (See instal-
lation instructions.)
• The drain hose, inlet hose and
mains cable must be laid so that
they are able to move freely within
the plinth area, and so that they
are not kinked or crushed when the dishwasher is in position.
• The dishwasher must also be screwed tightly to the work surface or to
the adjoining units. This is essential to ensure the dishwasher does
not tip up.
Built-Under Dishwasher
(see enclosed installation instructions)
Decor panels to match the kitchen
cupboards:
• must be obtained from the kitchen
manufacturer
• require a panel frame
• should be fixed to the door of the
appliance using double-sided adhe-
sive tape (to avoid bulges and pull-
ing out of shape)
• Decor panel dimensions:
height 590 mm, width 581 mm,
clamping depth: max. 4 mm
30